Textile Processing Machine,Textile Processing Machine Manufacturers,Textile Processing Machine Suppliers,India

LOOP STEAMER / CURING / POLYMERISING MACHINE

Special Features & Technical Data

"TEXFAB" continuous steaming / curing / polymerising machine is the updated and technologically advanced version of a textile processing machine. In our textile processing machine the steaming chamber is closed type made completely in stainless steel AISI 316. Fabric feed takes place through an opening on the front side whilst extraction is from the back side. The fabric is placed on rods and transported through the steaming chamber. The rods are rotating on their axis to avoid marking off from the rod itself. Loop formation is done by a dancing roller system.

For low temperature steaming the textile processing machine has a chamber roof which is heated by steam coils preventing condensation and drippings. Our steam agers are equipped with special device, a Steam Saturator, which conditions the steam passes through the water before being injected into the steaming chamber. These particular characteristics of steam pre- conditioning which prevent and control the exothermic reaction of the fabrics and of the printing paste, make our machine " UNIQUE" of its kind and are the basis of great success achieved all over in textile industries.

For high temperature steaming our steam agers are equipped with efficient re-circulation system and heat exchangers using Thermic Fluid which ensures uniform temperature in the chamber. Special system to allow air to re-circulate instead of steam permitting polymerization treatment with hot air upto 160°C.

Request A Quote

Enlarge view

For 101 m Gap Between two conveyor Rolls

Model	Unit	TLS-75	TLS-140	TLS-210	TLS-275	TLS-345
Fabric Capacity	Mtrs	75	140	210	275	345
Standard Roller Width	mm	1350-3500
Working Speed	Mtrs/min	3-15	5.6-28	8.4-42	11-50	13.8-50
Dwell Time	Min	5-25	5-25	5-25	5.5-25	6.9-25
Process Temp required in saturated condition	°C	102-108
Process Temp. required in high temp. condition	°C	130-180
Process Temp. required in hot air condition	°C	100-160
Average Steam Consumption	Kg/hr	275-650	400-900	500-1100	600-1225	700-1350
Installed Thermal Power	K.cal/hr	61500-154000	107500-231000	138500-284600	161500-538500	185000-370000
Installed Electric Power	Kw/ HP	11/15	11/15	14/19	14/19	17/23
Steam Pressure Required Before PRV	P.S.I	60
Steam Pressure Required After PRV	P.S.I	15-30
Thermic Oil Temp. Required	°C	240°C
Floor Space Required
Chamber Length (A)	mm	2903	4256	5610	6962	8315
Total Length (B)	mm	9453	10806	12160	13512	14865
Width	mm	Roller Width + 2256
Height	mm	3888	3888	3888	3888	3888

We reserve the right to change the dimensions / specifications without any notice
All Dimensions are in mm.
GL= Ground Level.
H = Roller Width

For 127 mm Gap Between Two Conveyor Rolls

Model	Unit	TLS-75	TLS-140	TLS-210	TLS-275	TLS-345	TLS-325
Fabric Capacity	Mtrs	60	115	165	220	270	325
Standard Roller Width	mm	1350-3500
Working Speed	Mtrs/min	3-15	5.6-28	8.4-42	11-50	13.8-50	13-50
Dwell Time	Min	5-25	5-25	5-25	5.5-25	6.9-25	6.5-25
Process Temp required in saturated condition	°C	102-108
Process Temp. required in high temp. condition	°C	130-180
Process Temp. required in hot air condition	°C	100-160
Average Steam Consumption	Kg/hr	275-650	400-900	500-1100	600-1225	700-1350	800-1475
Installed Thermal Power	K.cal/hr	61500-154000	107500-231000	138500-284600	161500-538500	185000-370000	210000- 400000
Installed Electric Power	Kw/ HP	11/15	11/15	14/19	14/19	17/23	17/23
Steam Pressure Required Before PRV	P.S.I	60
Steam Pressure Required After PRV	P.S.I	15-30
Thermic Oil Temp. Required	°C	240°C
Floor Space Required
Chamber Length (A)	mm	2903	4256	5610	6962	8315	9668
Total Length (B)	mm	9453	10806	12160	13512	14865	16218
Width	mm	Roller Width + 2256
Height	mm	3888	3888	3888	3888	3888	3888

We reserve the right to change the dimensions / specifications without any notice
All Dimensions are in mm.
GL= Ground Level.
H = Roller Width

Request A Quote