Looking for Product Name ?

Send Email
  • Home
  • Products
  • Dyeing Machines
  • PLC Based Soft Flow Dyeing Machine with Pre Heating Chambers

PLC Based Soft Flow Dyeing Machine with Pre Heating Chambers

PLC Based Soft Flow Dyeing Machine with Pre Heating Chambers

‘TEXFAB’ Soft to High Flow Fabric Dyeing Machine / Scouring Machine is laid out for the dyeing of light and heavy knitted fabric of cotton polyester and its blends and also suitable for scouring of light cotton woven fabric.

Soft Flow Dyeing Machine offers new kind of technical advantage with regards to process times, total energy consumption and fabric appearance.

Liquor ratio starts with 1:5 for polyester and 1:6 for cotton. Soft Nozzle and penetration pipe have been especially conceived for mild surface treatment of the material to be dyed.

The special full-flooded nozzle can be use from 40 mm to 200 mm diameter.

Rapid heating and cooling, over flow rinse and pump to drain.

Power clean, highly efficient spray system for boil out for machine cleaning

Excellent results are achieved in very short process to complete one turn, as one basket holding capacity is 150kg of fabric.

Lifter reel driven by frequency inverter controlled motor, for fabric speed upto 250 Mtrs /Min. subject to quality of fabric.

Heavy duty stainless steel centrifugal pump for optional dye liquor circulation. Thanks to turbo pump which consumes less power and high discharge of liquor.

Pressure vessel and all wet parts of machine are fabricated from stainless steel AISI 316 / 316L highly corrosion resistance.

All flanges, plaiter, take off roller is made out of stainless steel 304.

Bigger capacity colour Kitchen tank is available with stirrer & valves.

All safety devices required for a pressure vessel are incorporated with the machine.

Magnetic level indicator with duly calibrated in terms of liter.

Outer finish Shot Blasted.

Optional:
  • Feed pump to colour Kitchen Tank.
  • Seam Detector.
  • Fully automatic device with PLC and Pneumatic Operated
  • Control Values

Technical Specifications:

SUBJECT TO KIND OF FABRIC

Model

Unit

TOT 25-I

TOT 25-II

TOT 25-III

TOT 25-IV

TOT 25-VI

TOT 25-VIII

Fabric Loading Capacity Upto

Kgs

150

300

450

600

900

1200

No. of Tubes

Tubes

1

2

3

4

6

8

Pressure Vessel Diameter

mm

2480

2480

2480

2480

2480

2480

Liquor Ratio (1:5 - 1:6)

Liters

750 - 900

1500 - 1800

2250 - 2700

3000 - 3600

4500 - 5400

6000 - 7200

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name