HTHP Long Tube High Flow Turbo Fabric Dyeing Machine – Bottom Tube

'TEXFAB' High Speed High Flow Turbo Fabric Dyeing Machine/Scouring. Machine is widely accepted because of its excellent performance and technical up-gradation. for fabric dyeing of woven material especially those materials sensitive to create marks such as polyester, micro-fibers, etc. It minimizes some resistance and friction coefficient under high-speed circulation of fabric by new concept of design on the body structure.

Lifter reel driven by frequency inverter controlled motor, for fabrics speed upto 550 mtrs /min.

Highly efficient heat exchanger is a companion to the high fabric speed to ensure the shortest possible dyeing cycle with fast heating and cooling.

Heavy-duty stainless steel centrifugal pump is used for optional dye liquor circulation. The turbo pump consumes low power with high discharge of liquor.

Pressure vessel and all wet parts of machine made of stainless steel AISI316/316 highly corrosion resistant.

All flanges. Plaiters and take off rollers are made out of stainless steel 304.

Machine gives crimp effect as well as to realize soft touch and solid sense of materials to be dyed.

Bigger capacity colour kitchen tank is available with stirrer and valves.

All safety devices required for a pressure vessel are incorporated with the machine.

Outer finish Shot Blasted.

Magnetic level indicator with duly calibrated in terms of liter.

Reversing nozzle for tangling release system.

Optional:
» Feed pump to colour Kitchen Tank
» Seam Detector
» Fully automatic device with PLC and
» Pneumatic Operated Control Valves

MODEL	UNIT	TTJ-I-150	TTJ-I-200	TTJ-II-300	TTJ-II-400
Fabric loading capacity upto	kgs	150	200	150x2	200x2
No. of tubes	tubes	1	1	2	2
Pressure vessel diameter	mm	600	600	870	870
Liquor ratio (1:5)	liters	750	1000	1500	2000
CONNECTOR POWER
Main pump motor	hp	20	20	25	25
Lifter reel motor	hp	1	1	2	2
Take of reel motor	hp	1	1	1	1
Max. working temp.	°C	135	135	135	135
Max. working pressure	kg/cm²	3	3	3	3
Heating time (average) 30°C-130°C	min	40	45	50	60
Cooling time (average) 130°C-85°C	min	20	25	30	35
Steam pressure required	kg/cm²	5	5	5	5
Water pressure required	kg/cm²	1	1	1	1
Fabric speed upto	mtrs/min	550	550	550	550
FLOOR SPACE REQUIRED
Vessel length (A)	mm	8700	9700	8050	9050
Total length (B)	mm	10025	11200	9425	10425
Width (C)	mm	1750	1750	2300	2300
Height (D)	mm	2875	2875	3425	3425
We reserve the right to change the dimensions / specifications without any notice
All dimensions are in mm GL = Ground Level

HTHP Long Tube High Flow Turbo Fabric Dyeing Machine – Bottom Tube

Technical Data