HTHP 'O' Tube Soft to High Flow Universal Fabric Dyeing Machine

'TEXFAB' Soft to High Flow Fabric Dyeing Machine / Scouring Machine is laid out for the dyeing of light and heavy knitted fabric of cotton polyester and its blends and also suitable for scouring of light cotton woven fabric.

Soft Flow Dyeing Machine offers new kind of technical advantage with regards to process timing, total energy consumption and fabric appearance.

Liquor ratio starts with 1:5 for polyester and 1:6 for cotton. Soft nozzle and penetration pipe have been especially conceived for mild surface treatment of the material to be dyed.

The special full flooded nozzle can be used from 40 mm to 200 mm diameter.

Rapid heating and cooling, overflow rinse and pump to drain.

Power clean, highly efficient spray system for boil out and machine cleaning.

Excellent results are achieved in very short process to complete one turn, as one basket holding capacity is 150kg of fabric.

Heavy duty stainless steel centrifugal pump for optional dye liquor circulation. The turbo pump consumes less power with high discharge of liquor.

Pressure vessel and all wet parts of machine are fabricated out of stainless steel AISI 316/ 316L highly corrosion resistance.

All flanges, plaiter. take off roller are made out of stainless steel 304.

Bigger capacity colour Kitchen tank is available With stirrer & valves.

All safety devices required for a pressure vessel are incorporated with the machine.

Magnetic level indicator with duly calibrated in terms of liter.

Outer Finish Shot Blasted.

Optional:
» Feed pump to colour Kitchen Tank
» Seam Detector
» Fully automatic device with PLC and Pneumatic Operated Control Valves

MODEL	UNIT	TOT 25-l	TOT 25-ll	TOT 25-lll	TOT 25-lV	TOT 25-Vl	TOT 25-Vlll
Fabric loading capacity upto	kgs	150	300	450	600	900	1200
No. of tubes	tubes	1	2	3	4	6	8
Pressure vessel diameter	mm	2480	2480	2480	2480	2480	2480
Liquor ratio 91:5 – 1:6)	liters	750-900	1500-1800	2250-2700	3000-3600	4500-5400	6000-7200
CONNECTED POWR
Main pump motor	hp	5	7.5	10	20	25	30
Lifter reel motor	hp	1x1	1.5x1	1x1&1.5x1	1.5x2	1.5x3	1.5x4
Take of reel motor	hp	1	1	1.5	2	1x3	2x2
Pilling motor	hp	1x1	1x1	1x1	1x2	1x2	1x3
Max. working temp.	°C	130	130	130	130	130	130
Max. working pressure	kg/cm²	3	3	3	3	3	3
Heating time (average) 30°C - 130°C	min	30	30	45	60	75	90
Cooling time (average) 130°C-85°C	min	15	15	20	40	45	60
Steam Pressure required	kg/cm²	5	5	5	5	5	5
Water pressure required	kg/cm²	1	1	1	1	1	1
Fabric speed upto	mtrs/min	250	250	250	250	250	250
FLOOR SPACE REQUIRED
Extra space on back (A)	mm	300	300	300	300	1100	1100
Total length (B)	mm	4380	4380	4380	4380	5180	5180
Vessel width (C)	mm	1200	1900	2650	3300	4850	6250
Drive side (D)	mm	1100	1130	1500	1500	1500	1500
Total width (E)	mm	3000	3900	4850	5500	7050	8450
Total height (F)	mm	3110	3110	3110	3110	3110	3110
We reserve the right to change the dimensions / specifications without any notice
All dimensions are in mm GL = Ground Level

HTHP 'O' Tube Soft to High Flow Universal Fabric Dyeing Machine

Technical Data